0%
Global

About Us

Services

Prequalified Certifications

DBE Certified

INDOT Prequalified

5.2 Environmental Document Preparation – CE

5.3 Environmental Document Preparation – Section 4(f)

6.1 Topographic Survey Data Collection

8.1 Non - Complex Roadway Design

10.4 Lighting Design

11.1 Right of Way Plan Development

13.1 Construction Inspection

16.1 Utility Coordination

18.1 Pavement Analysis - Design Services

Technical Services ( ASTM, AASHTO and I ndiana Test Methods)

Concrete

C31 & T23 Making and Curing Concrete Test Specime ns in the Field

C39 & T22 Compressive Strength of Cylindrical Concrete Specimens

C78 & T97 Flexural Strength of Concrete (Using Simple Beam w/Third - Point Loading)

C138 & T121 Mass per Cubic Foot, Yield, and Air Content (Gravimetric) of Concrete

C143 & T 119 Slump of Hydraulic Cement Concrete

C172 & T141 Sampling Freshly Mixed Concrete

C231 & T152 Air Content of Freshly Mixed Concrete by the Pressure Method

C470 Molds for Cylindrical Specimens

C511 Moist Cabinets, Moist Rooms, & Water Storage Tanks

C1064 & T309 Temperature of Freshly Mixed Portland Cement Concrete

C1231, T22 Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

ITM403 Water - Cementitious Ratio

Aggregates

C40 & T21 Organic Impurities in Fine A ggregates for Concrete

C117 & T11 Materials Finer Than No. 200 Sieve in Mineral Aggregates by Washing

C127 & T85 Specific Gravity and Absorption of Coarse Aggregate

C128 & T84 Specific Gravity and Absorption of Fine Aggregate

C136 & T27 Sieve Analysis of Fine and Coarse Aggregates

C566 & T255 Total Evaporable Moisture Content of Aggregate by Drying

C702 & T248 Reducing Samples of Aggregate to Testing Size

D75, T2, ITM 207 Sampling of Aggregates

Soils

D421 & R58/T87 Dry Preparation of Disturbed Soil and Soil Aggregate Samples for Test

D422 & T88 Particle Size Analysis of Soils

D698 & T99 Laboratory Compaction Characteristics of Soil Using Standard Effort

D1140 Amount of Material in Soils Finer than No. 200 Sieve

D1556 & T191 Density of Soil in Pl ace by the Sand Cone Method

D1557 & T180 Laboratory Compaction Characteristics of Soil Using Modified Effort

D2216 & T265 Laboratory Determination of Moisture Content of Soils

D2487 Classification of Soils for Engineering Purposes (USCS)

D2937 Density of Soil in Place by Drive Cylinder Method

D3282 Classification of Soils & Soil - Aggregate Mixtures for Highway Construction Purposes

D4318 & T89/T90 Liquid Limit, Plastic Limit & Plasticity Index of Soils

T272 Family of Curves - One Point Method

ITM506 Field Determination of Moisture Content of Soil

ITM508 Field Determination of Deflection Using Light Weight Deflectometer

ITM509 Field Determination of Strength Using Dynamic Cone Penetrometer

HMA/Bituminous Materials

D140 & T40 Sampling Bituminous Mat erials

D979 & T168 Sampling Bituminous Paving Mixtures

D2172, T164 & ITM571 Quantitative Extraction of Bitumen from Bituminous Paving Mixtures

D2726 & T166 Bulk Specific Gravity and Density of Non - Absorptive Compacted Bituminous Mixtures

D3203 & T269 Percent Air Voids in Compacted Dense & Open Bituminous Paving Materials

D3665 Random Sampling of Construction Materials

D5444 & T30 Mechanical Size Analysis of Extracted Aggregates

D6307, T308 & ITM586 Determining the Asphalt Binder Content of Hot Mix Asph alt by the Ignition Method

T329 & ITM572 Moisture Content of HMA by Oven

R47 & ITM587 Reducing Samples of Hot Mix Asphalt

Our Vision :

Global Engineering and Land Surveying has established documented Quality Objectives, and review and revises them (as appropriate) annual, at a minimum.
For each Quality Objective, measures are identified and goals or each measure are established.
Performance for each measure is tracked, and strategies and initiatives are executed to drive achievement of the defined goals.
About Us

Mission Statement

Global Engineering and Land Surveying is committed to achieving customer requirements, while upholding regulatory and professional requirements by engaging every employee in the continual improvement of our processes.
We are committed to fulfilling our primary obligation to protect the safety, health, and welfare of the public in the performance of our professional duties.
Let's talk

Contact US